Insulation Resistance Tester

In a perfect world, all the electrical current sent along a conductive wire would reach its intended destination. However, in the real world some of it is lost along the way for various reasons. Wires are insulated with a resistant sheathing to contain the conductivity of the typically copper or aluminum core, but even with this insulation resistance tester in place, some of the current still manages to escape.

Much like a leak in a water pipe, an imperfection in the insulation resistance tester of a wire allows a steady flow of electricity to escape, which can be detrimental to electrical circuits and machinery. However, testing can help you determine whether the insulation resistance tester is performing at an effective and safe level. Routine testing can identify problems before they result in injury or equipment failure.

Innovation in insulation resistance tester

Insulation resistance tester is subject to many elements that can cause it to perform at a less-than-acceptable level. Excessive heat or cold, moisture, vibration, dirt, oil, and corrosive vapors can all contribute to deterioration. For this reason, routine insulation resistance tester testing is necessary.

Insulation resistance tester starts to age as soon as it's made. As its ages, its insulating performance deteriorates. Any harsh installation environments, especially those with temperature extremes and/or chemical contamination, accelerates this process. This deterioration can result in dangerous conditions in power reliability and personnel safety. As such, it's important to identify this deterioration quickly so that corrective steps can be taken. One of the simplest tests and its required test instrument are not universally understood. To help eliminate this lack of understanding, let's discuss in detail Insulation resistance tester Resistance (IR) testing and the megohmmeter.

The  is an insulation resistance tester resistance tester available for a wide range of various electric and electronic components, as well as electric and electronic equipment. Output voltage can be optionally set in the range of (XXXXX) Vdc with a resolution of 1 V. As it is fitted with a window comparator and timer function, the tester is capable of efficiently conducting insulation resistance tester resistance tests based on various safety standards. In addition, this product is equipped with panel memory as standard feature, which can be recalled by remote control, SIGNAL I/O connector, and the interface for easy automatic testing system construction.

 Features (pre-made and assumed)

·         Provided with the discharge function

·         Equipped with the window comparator

·         Hold function

·         Provided with the timer function

·         Rear output terminals

·         Measured-value monitoring terminals

·         Equipped with the panel memory

·         Equipped with the SIGNAL I/O connector and remote-control terminal

·         Equipped with the RS-232C interface as standard